** a full scale template is required to manufacture ellipse radius curves **
- • Capture the inside of the curve on your template (paper).
- • Measure around outside of template to determine length and add an additional 12 inches for cutting/mitering.
- • Tightest radius in shoulder is 2x width of profile.
- • Template length may be adjusted to ensure a proper fit.
![](https://flexiblemouldingconcepts.com/media/wysiwyg/ellipse.jpg)
Please mail template to:
Resinart East Inc.
201 Old Airport Road
Fletcher, NC 28732
** a full scale template is required to manufacture oval radius curves **
- • Capture the inside of the curve on your template (paper).
- • Measure around outside of template to determine length and add an additional 12 inches for cutting/mitering.
- • Tightest radius in shoulder is 2x width of profile.
- • Template length may be adjusted to ensure a proper fit.
- • Ovals are made in 2 pieces (equal halves).
![](https://flexiblemouldingconcepts.com/media/wysiwyg/oval.jpg)
Please mail template to:
Resinart East Inc.
201 Old Airport Road
Fletcher, NC 28732
** a full scale template is required to manufacture custom radius curves **
- • Capture the inside of the curve on your template (paper).
- • Measure around outside of template to determine length and add an additional 12 inches for cutting/mitering.
- • Tightest radius in shoulder is 2x width of profile.
- • Template length may be adjusted to ensure a proper fit.
Please mail template to:
Resinart East Inc.
201 Old Airport Road
Fletcher, NC 28732
** Capitals are designed to rest on TOP of column. They do NOT wrap around **