** a full scale template is required to manufacture ellipse radius curves **
- • Capture the inside of the curve on your template (paper).
- • Measure around outside of template to determine length and add an additional 12 inches for cutting/mitering.
- • Tightest radius in shoulder is 2x width of profile.
- • Template length may be adjusted to ensure a proper fit.
Please mail template to:
Resinart East Inc.
201 Old Airport Road
Fletcher, NC 28732
** a full scale template is required to manufacture oval radius curves **
- • Capture the inside of the curve on your template (paper).
- • Measure around outside of template to determine length and add an additional 12 inches for cutting/mitering.
- • Tightest radius in shoulder is 2x width of profile.
- • Template length may be adjusted to ensure a proper fit.
- • Ovals are made in 2 pieces (equal halves).
Please mail template to:
Resinart East Inc.
201 Old Airport Road
Fletcher, NC 28732
** a full scale template is required to manufacture custom radius curves **
- • Capture the inside of the curve on your template (paper).
- • Measure around outside of template to determine length and add an additional 12 inches for cutting/mitering.
- • Tightest radius in shoulder is 2x width of profile.
- • Template length may be adjusted to ensure a proper fit.
Please mail template to:
Resinart East Inc.
201 Old Airport Road
Fletcher, NC 28732
** Capitals are designed to rest on TOP of column. They do NOT wrap around **
Custom Molds can be made from your profile. Send us 2ea 7ft pieces of your Moulding and we will make a custom Tooling that will make any Radius 3 times the profiles width or greater. Mold charges are $50.00 per inch of width. Example...2-1/2" casing would be $125.00. Prices are rounded up in 1/2" increments.
Resinart Mould Making Preparations
1.) Find a 14 foot length of the moulding you want to use.
Use the correct species of wood
No unusual blemishes in the piece, large knots, splits, etc.
2.) Cut the piece of moulding into two equal pieces
Mark the cut ends A & B
3.) Put the following information on each piece
Company Name and / or Contact Name
Address
City/State/Zip
Phone Number
P.O. Number if applicable
4.) Box and ship the two marked pieces of moulding to Resinart.
Ship to:
ResinArt - East
201 Old Airport Road
Fletcher, NC 28732